|
Post by machalf on Jul 20, 2005 12:16:26 GMT -5
|
|
|
Post by undertaker319 on Jul 20, 2005 14:12:05 GMT -5
sorry, I was replying to they question JBLayfield answered. First of all, Welcome to Code X. I hope you find what you need here. You need to use the GS v 2.x-5.x. If you are, you might also be using the wrong region (NTSC[North America] or PAL[everywhere else]). If none of these help you, yes, we screweD.
|
|
|
Post by bubbaaustin2 on Jul 25, 2005 15:45:20 GMT -5
hi there guys i am a noobee to all this layer modiefing stuff i recently purchased a gameshark broadband enabled it is a gameshark 5.3 ntsc and i haven't the slightest clue what i am doing i would appreciate if some one could contact me and tell me if there are any gameshark clubes in my area ? i live in (quebec canada) or if possible email me and give me a step by step coarse in adding new codes my addy is austin316@videotron.ca or austin3160@hotmail.com
|
|
|
Post by undertaker319 on Jul 25, 2005 16:44:22 GMT -5
Consult your instructions first before wasting our time.
|
|
|
Post by sirdmg on Sept 2, 2005 3:46:31 GMT -5
ok call me lazy but I dun wanna take the time to try this on my own....but can this code be used so that the pants are tucked inside of your boots if not is there a code to do this?
|
|
|
Post by H.P.77 on Sept 2, 2005 6:17:22 GMT -5
[glow=limegreen,2,300]Yes it can be done, just move the boots in front of the pants. Before you use the codes, check the two layers you want to modify first.[/glow]
|
|
|
Post by elad56714 on Oct 18, 2005 9:47:19 GMT -5
Ok i tried this and i cant get it to work. i tried my caw 1 and replaced the underwear 09 layer with the extra hair layer code ( gs2v4 003DA246 00000005 )and it wont change...i still have underwear there. i tried it many time's and with differant layer's but nothing. what am i doing wrong? Doe's it matter if the caw is already made? cause i tried it with an empty caw slot from scratch and i still have underwear there instead of an extra hair layer.
|
|
|
Post by sergio517 on Oct 18, 2005 9:57:59 GMT -5
It should work no matter what. If it's made first or not.
|
|
|
Post by elad56714 on Oct 18, 2005 10:53:10 GMT -5
well i dont know then ive tried so many times and with differant caw...i just cant get an extra layer for hair.
|
|
|
Post by wolfgangjt on Oct 19, 2005 14:11:30 GMT -5
where are you located, cause if your not in the US, that'd be why. NTSC is the US version, PAL is the European version...make sure you get the codes that match the correct type you have. Then (seeing I have GS2v4 and know for a fact the codes work), here's what to make sure you are doing: 1) First thing is to make a Code game slot by making a new name in the list and name it (I called it WWE Smackdown vs Raw 2) once name is made, highlight over it and press D-Pad to the right. This will go to a blank screen where you will make the list of names of the codes. 3) create the new name of the code...First and Foremost...the very first code name that should be on the list is the Master Code, so start by creating a name that says Master Code or M (Must be on). 4) once that name is created, hightlight over it and D-pad right. Takes you to another blank screen. 5) This is the screen the codes will go in for that name area. Create the codes listed in the Master Codes topic in the Code Archive (make sure again that you are matching the correct codes for your cheat device, in this case GS2v4, and for the type NTSC=USA, PAL=European). Once the code(s) is/are in completely, left D-Pad back to the screen that has the code list names (Master Code, etc). 6) Repeat 3-5 for each caw hack, naming the code as you choose...for hair hacks, I tend to name it "Hair hack CAW 01", etc. 7) once you have all the codes in that you are doing, left D-Pad back to the screen where the game names are. Highlight over the WWE Smackdown vs Raw one (usually at the top), and press X...this will turn all the codes on (you should see the name of the game start flashing to let you know it's on)...once that is done, keep the hightlight cursor over the name of the game and press STart...this will bring up a screen asking you if you want to save. Press the button for YES. 8) once that is done, it should take you back to the screen that says START GAME, go to that and press X...this will automatically eject your code disk so you can put in the game disk...Put the game disk in, and close the tray (do not turn off the PS2 during any of this...no need to)...once you have it in, press X again for OK. this will boot up the game. Once the game is up, the codes should be working. Save the game either in create mode or in the Options area. Hope that helps ya.
|
|
|
Post by sergio517 on Oct 19, 2005 14:19:51 GMT -5
I have GS media player and In order for my codes to take effect, I must save the code and restart my PS2. Then I highlight my codes and press start. Then I switch disks and there u go.
|
|